IP via Satellite | Mobile Satellite | Maritime VSAT | Satellite Networks | Broadcast | Applications | e-Quote | Trading Platform | Support

Dish Pointer

When aligning a dish, you need to know the look angles such as the azimuth, elevation and LNB skew. These are all specific to your location and the chosen satellite. The azimuth tells you the direction in which to point the antenna. The elevation is the vertical lift, and the LNB skew is the polarization of the signal, or in other words by how much you have to rotate the LNB. If you have a multi-lnb dish, you tilt the whole dish rather than tilting the LNB. Once you?ve obtained all these values from this site, preset the elevation and dish skew and point the dish at a landmark indicated by the alignment line on the map. You'll already be over half the way there. On the receiver, check the satellite signal strength and the network ID of the transponder; it should match the satellite you intend to receive. Move the dish slightly to the left/right and up/down in very small steps and very slowly and watch the signal strength bar on the receiver to do the fine-tuning. Finally, tweak the LNB skew for maximum signal quality.


Subscribers' Login